Tailgate lock striker - r+r
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Tailgate/flap › Tailgate lock striker - r+r
‹ Prev Single tailgate lock - r+r or repair with panel/protection removedNext › Tailgate lock motor - r.r and check lock supply line
Body fittingsTailgate lock striker - r+r
TAILGATE LOCK STRIKER - R+R
Removing
1. Undo the bolts.
2. Remove the striker.
Refitting
- Check that the striker is not damaged.
- Position the striker and screw in the fixing bolts without tightening them.
1. Adjust the position of the striker (1a). Tighten the bolts (1b). The arrows indicate the possible movements.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Tailgate lock striker | Bolt | M6 | 0.6 ÷ 1.0 |
- Check that the tailgate opens and closes correctly.
‹ Prev Single tailgate lock - r+r or repair with panel/protection removedNext › Tailgate lock motor - r.r and check lock supply line
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.