Cam lift - check with tappet cover(s) removed
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Various checks › Cam lift - check with tappet cover(s) removed
‹ Prev Timing gear with belt drive - check - carry out operation with cam cover(s) removed and tappets adjusted and crankshaftNext › Fuel system - check delivery pressure
Diagnostic checksCam lift - check with tappet cover(s) removed
CAM LIFT - CHECK WITH TAPPET COVER(S) REMOVED
- Use a magnetic base with dial gauge to check that the nominal camshaft lift is within specified levels.
Use the toothed drive pulley bolt to turn the crankshaft.
| Measurement | Value | Validity |
|---|---|---|
| Nominal camshaft cam lift (mm) | 9.5 | 1.2 8v 1.4 8v |
| Measurement | Value | Validity |
|---|---|---|
| Nominal inlet cam lift (mm) | 8.5 | 1.9 Multijet |
| Measurement | Value | Validity |
|---|---|---|
| Nominal exhaust cam lift (mm) | 9.0 | 1.9 Multijet |
‹ Prev Timing gear with belt drive - check - carry out operation with cam cover(s) removed and tappets adjusted and crankshaftNext › Fuel system - check delivery pressure
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.