ENGINE OIL DRAIN PLUG - REPLACE

Operation 1020A30 · CRANKCASE OIL SUMP

1.3 Multijet

Removing

- Position the vehicle on a lift.

1. Unscrew the engine oil drain plug and allow the engine oil to drain out into a suitable container.

Do not let the oil disperse into the environment as indiscriminate dispersion of this product causes pollution.

Refitting

- Tighten the new engine oil drain plug to the recommended torque.

Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY

- Remove the vehicle from the lift.

1.9 Multijet

If the engine oil is being changed, carry out the resetting operations using the Examiner.

Engine oil is harmful to skin: keep contact with skin to a minimum and if there is contact wash with soap and water.

- Position the vehicle on a lift.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

- Unscrew the oil drain plug.

Collect the engine oil in a suitable container.

- Tighten the new gearbox oil drain plug to the recommended torque.

Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

- Remove the vehicle from the lift.