Belt rewinding failure
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Seats › Belt rewinding failure
Fault diagnosisBelt rewinding failure
BELT REWINDING FAILURE
The seat belt does not rewind correctly and/or fully after the buckle is undone
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Check visually for folds, fraying and/or damage to the belt that could prevent it from rewinding | Move on to Step 1 | 1. Folds are present on the front belt 2. Folds are present on the rear belt 3. Front belt strap damaged 4. Rear belt strap damaged | 1. Remove the folds and replace the belt if necessary Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON REEL - R.R 2. Remove the folds and replace the belt if necessary Op. 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R. 3. Replace the front belt Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON REEL - R.R 4. Replace the rear seat belt | |
| 1 | CHECK CORRECT INSTALLATION | All OK | Problems encountered | Operation |
| Check that the system installation is correct | End of diagnosis | Incorrect installation | Proceed as instructed | |
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Grande Punto
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.