Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)02 · Specifications
02 · General

Lubricants

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Products › Lubricants
SpecificationsLubricants

LUBRICANTS

1.2 8v1.4 8v1.4 16v1.3 Multijet 75bhp1.3 Multijet 90CV - 5 speed1.3 Multijet 90CV - 6 speed1.9 Multijet
Engine oil

SELENIA K

SAE 5W-40 - FIAT 9.55535-M2

SELENIA WR

SAE 5W-40 - FIAT 9.55535-N2

Transmission fluid

TUTELA CAR TECHNYX

SAE 75W-85 - API GL4 PLUS

TUTELA CAR MATRIX SAE 75W-85 - API GL4
Air conditioning compressor fluidND 8

For the correct operation of Multijet versions with DPF, only use the original type of lubricant.

In emergencies, where the original product is not available, only top up with a maximum of 0.5 litres.

If SAE 5W-40 non original products are used, lubricants with minimum ACEA A3 standards for petrol engines are acceptable, ACEA B4 for diesel engines; in this case the optimum engine performance is guaranteed.

The use of products with lower specifications than ACEA A3 and ACEA B4 could cause damage to the engine not covered by the warranty.

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.