Engine starting
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Electrical equipment › Engine starting
Tightening torquesEngine starting
ENGINE STARTING
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Positive lead (+30) on starter motor | Nut | M8 | 0.7 ÷ 1.1 | |
| Supply lead (+50) on starter motor | Nut | M6 | 0.4 ÷ 0.6 | |
| Supply lead on heater plugs control unit | Nut | M6 | 0.4 ÷ 0.6 | |
| Starter motor | Bolt | M8 | 2.25 ÷ 2.75 | |
| Heater plug | M12 | 1.3 ÷ 1.6 | 1.9 Multijet | |
| Heater plug | M8 | 0.9 ÷ 1.1 | 1.3 Multijet |
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTEngine gasket setSearch: Fiat Grande Punto 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.