Front suspension
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Suspension and wheels › Front suspension
Tightening torquesFront suspension
FRONT SUSPENSION
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Front shock absorber - steering knuckle side | Bolt (to be replaced) | M12 | 10.3 ÷ 12.6 + 45° | |
| Front suspension lower track control arm - steering knuckle side | Bolt | M10 | 5.4 ÷ 6.6 | |
| Rear shock absorber - bodyshell side | Bolt | M10 | 7.2 ÷ 8.8 | |
| Anti-roll bar joint | Nut | M10 | 4.5 ÷ 5.5 | |
| Track control arm front bush to front suspension crossmember | Bolt (to be replaced) | M12 | 5.0 ÷ 6.0 + 90° | |
| Track control arm rear bush to front suspension crossmember | Bolt (to be replaced) | M12 | 5.0 ÷ 6.0 + 90° | |
| Anti-roll bar to front suspension crossmember | Bolt | M8 | 2.3 ÷ 2.7 | |
| Front shock absorber - bodyshell side | Nut | M12 | 4.7 ÷ 5.2 | |
| Front suspension crossmember to bodyshell | Bolt | M12 | 12.1 ÷ 14.8 | |
| Front shock absorber to end of travel buffer | Bolt | M12 | 3.6 ÷ 4.4 |
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Grande Punto 2005 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.