AIR BAG MODULE - Passenger side - R.R.

Operation 5580C22 · Air bag system

FOLLOW ALL THE RECOMMENDED SAFETY RULES (see 5580C - Precautions).

Removing

- 7040A19 cushion padding - r r

1. Open the fuse access cover in the dashboard.

2. Remove the drawer (2a), releasing the internal retainers (2b).

1. Disconnect the Air Bag module electrical connections (1a, 1b).

2. Undo the bolts (2a) and remove the Air Bag module (2b), disengaging it from the positioning retainer (2c).

Place the Air Bag module in the special cupboard, resting it on a free surface with the bag facing upwards.

Refitting

Observe the following precaution.

Handle the Air Bag module with extreme caution. Ensure the battery is disconnected.

If a new module is being fitted, attach the labels. Detach the removable part of the adhesive label from the new module and put it in a specific file recording the vehicle details (model, registration data, chassis no.) and the serial no. of the old module. This file should be kept for future checks. A new label is supplied together with the module, to be stuck on top of the existing one. However, it should first be perforated to indicate the month and 14 years after the year when the module is fitted (e.g. 2017 will correspond to 2003).

Position the Air Bag module and secure with the bolts.

Connect the electrical connections.

Position the right drawer, engaging the retainers.

- 7040A19 cushion padding - r r

Connect the battery.

Using the Examiner, check that the system has not picked up errors during the operation.