Engine oil pressure warning light switch - r + r

Operation 1084A42 · Indicators/check devices

1.4 16v

Removing

Position the vehicle on the ramp

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

1. Disconnect the electrical connection from the engine oil pressure warning light switch.

2. Undo and remove the engine oil pressure warning light switch.

1.3 JTD 16v

Removing

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

1. Disconnect the electrical connection from the engine oil pressure warning light switch.

2. Undo and remove the engine oil pressure warning light switch from the cylinder head.

1.4 16v

Refitting

Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.

Connect the electrical connection to the engine oil pressure warning light switch.

Connect the negative (-) battery terminal.

Remove the car from the ramps.

1.3 JTD 16v

Refitting

1. Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.

2. Connect the electrical connection to the engine oil pressure warning light switch.

Connect the negative (-) battery terminal.