Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Idea Factory Service Manual (2003-2012)22 · Fault diagnosis
22 · Diagnostics

Side lights not working

Make
Fiat
Model
Idea Factory Service Manual
Year
2003–2012
Section
Lights › Side lights not working
Fault diagnosisSide lights not working

SIDE LIGHTS NOT WORKING

The side lights are switched on directly by the Body Computer Node at the same time as the number plate lights.

Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation

With the ignition ON, turn the ring nut on the steering column switch unit to the side lights and check that the side lights and the number plate lights come on.

Turn the ignition off, press the parking lights button on the switch panel unit, and check that the side lights and number plate lights come on

End of diagnosisNone of the lights come on in any conditionsContinue according to the instructions See table I01 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING
The parking lights do not workContinue according to the instructions See table I02 PARKING LIGHTS NOT WORKING
Only the side lights are not workingContinue to Step 1
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the Examiner to the diagnostic equipment and check that there are no faults at the Body Computer NodeContinue to Step 2Body Computer faultyContinue according to the instructions for the diagnostic equipment
2CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation

Check the condition of the bulbs.

Check the continuity and insulation of the wiring for the front and rear side lights See E2010 SIDE LIGHTS / NO. PLATE LIGHTS

Continue to Step 3Front bulbs blownReplace the bulbs Op. 5540B32
Rear bulbs burnt outReplace the bulb Op. 5540A50
Connections broken/short circuitedRenew the electrical connections See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
3CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Keeping the Examiner diagnostic equipment connected, check the operation of the side lights through active diagnosisContinue to Step 4None of the side lights come onReplace the Body Computer Op. 5505A32
4CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosis

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.