Manual front windows not working
- Make
- Fiat
- Model
- Idea Factory Service Manual
- Year
- 2003–2012
- Section
- Window opening mechanism › Manual front windows not working
‹ Prev One of the electric front windows is not workingNext › (electrically operated) rear windows not working
Fault diagnosisManual front windows not working
MANUAL FRONT WINDOWS NOT WORKING
If an obstacle is detected between the glass and the upper safety casing whilst the window is closing, it does not stop immediately or change direction.
The change of direction if an obstacle is detected lasts for around 300 ms.
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that there are no erros in the Door Node control unit involved | Continue to Step 2 | Presence of errors in the door node involved | Continue according to the instructions for the diagnostic equipment | |
| 2 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
| Check the condition of the connection between the door node control unit involved and the safety sensor outer casing See E3050 ELECTRIC FRONT WINDOWS | Continue to Step 3 | Connections broken | Restore the connections See E3050 ELECTRIC FRONT WINDOWS | |
| 3 | Continue as instructed by the tester | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the safety sensor casing Op. 7005D18 | |
‹ Prev One of the electric front windows is not workingNext › (electrically operated) rear windows not working
Parts & tools for this job For 2003 Fiat Idea
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.