Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Idea Factory Service Manual (2003-2012)10 · Gearbox and differential
10 · Transmission

Gear control lever - r r

Make
Fiat
Model
Idea Factory Service Manual
Year
2003–2012
Section
Manual gearbox external controls › Gear control lever - r r
Gearbox and differentialGear control lever - r r

Gear control lever - r r

Operation 2125C28 · Manual gearbox external control (cables)

1.4 16v

Removing

Proceed with removal - 7040L37 gear lever plate - r r

Proceed with removal - 7040A65 passenger compartment box lock, one, r r

Proceed with removal - 7040A19 cushion padding - r r

Proceed with removal - 7040A28 TRIM on gearbox control panel - R.R.

Proceed with removal - 7040A30 Left instrument panel lower TRIM - R.R.

1. Disconnect the gear selector and engagement cables for the manual gearbox.

2. Remove the gear control lever (2a) and the housing (2b) from the support.

Gear control lever - r r

1.3 JTD 16v

Removing

Proceed with removal - 7040L37 gear lever plate - r r

Proceed with removal - 7040A65 passenger compartment box lock, one, r r

Proceed with removal - 7040A19 cushion padding - r r

Proceed with removal - 7040A28 TRIM on gearbox control panel - R.R.

Proceed with removal - 7040A30 Left instrument panel lower TRIM - R.R.

1. Disconnect the gear selector and engagement cables for the manual gearbox.

2. Remove the gear control lever (2a) and the housing (2b) from the support.

Gear control lever - r r

1.4 16v

Refitting

Place the manual gearbox control lever and the housing in the housing on the support.

Connect the gear selector and engagement cables to the manual gearbox control lever.

Adjust the gear selector cable - 2125C30 gear engagement cable - r r.

Proceed with refitting - 7040A30 Left instrument panel lower TRIM - R.R..

Proceed with refitting - 7040A28 TRIM on gearbox control panel - R.R..

Proceed with refitting - 7040A19 cushion padding - r r.

Proceed with refitting - 7040A65 passenger compartment box lock, one, r r.

Proceed with refitting - 7040L37 gear lever plate - r r.

1.3 JTD 16v

Refitting

Place the manual gearbox control lever and the housing in the housing on the support.

Connect the gear selector and engagement cables to the manual gearbox control lever.

Proceed with refitting - 7040A30 Left instrument panel lower TRIM - R.R..

Proceed with refitting - 7040A28 TRIM on gearbox control panel - R.R..

Proceed with refitting - 7040A19 cushion padding - r r.

Proceed with refitting - 7040A65 passenger compartment box lock, one, r r.

Proceed with refitting - 7040L37 gear lever plate - r r.

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.