Engine oil drain plug - replace

Operation 1020A30 · Crank case oil sump

1.6 16v

Removing

Place the car on a ramp.

Raise the car.

Place a container under the vehicle to collect the engine oil.

1. Undo the engine oil drain plug on the oil sump and drain the oil.

Used engine oil and old oil filters contain substances dangerous to the environment. Dispose of the old oil and filters in containers designed for this purpose.

Refitting

Clean and tighten the oil cap. Replace the cap seal.

Tighten the oil cap on the sump to the specified torque.

Lower the lift.

Refill the engine lubrication circuit using the recommended oil.

- 1084A10 ENGINE OIL - Check level and top up, if necessary

Remove the vehicle from the lift.

1.9 JTD 8V

Removing

Place a container beneath the oil sump to collect the engine oil.

1. Unscrew the engine drain plug from its seat on the sump and remove.

Used engine oil contains substances harmful to the environment. Discard these substances in containers designed for their disposal.

Refitting

Tighten the new sump plug to torque.

- 1084A10 ENGINE OIL - Check level and top up, if necessary