Oil sump bulkhead - r r

Operation 1020A46 · Crank case oil sump

1.9 JTD 8V

Removing

1. Unscrew fitting (1a) and remoe the condensed oil return pipe.

2. Unscrew retaining bolts (2a) and remove vibration-proof partition (2b) fastened to the oil sump.

Refitting

Fit the vibration-proof partition into its seat in the oil sump.

Tighten the retaining bolts.

Fit the condensed oil return pipe.

Tighten the fitting.

Removing

1. Remove the connector for the condensation oil return pipe to the sump.

2. Remove the inner connector for the condensation oil return pipe to the sump complete with O-ring.

3. Undo the bolts (3a) and remove the crankcase oil sump partition (3b).

Refitting

Fit the crankcase oil sump partition and fix it tightening the bolts to torque.

Fit the inner connector for the condensed oil return pipe to the sump complete with O-ring.

Fit the connector for the condensation oil return pipe to the sump.