Clock not working
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Instrument panel › Clock not working
Fault diagnosisClock not working
CLOCK NOT WORKING
The clock does not work, while the other instrument functions work normally
| Results of the tests | ||||
| 1 | CHECK CLOCK ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
|---|---|---|---|---|
Check:
( See E4010 INSTRUMENT PANEL). | Continue to Step 2 | Component defective | Replace the component involved (if a fuse is involved, search for the cause of the problem) | |
| Connections broken | Restore the connections | |||
| 2 | CHECK CLOCK | All OK | Problems met | Operation |
| Check instrument operation, particularly the clock function see DESCRIPTION AND OPERATION: 5560 INSTRUMENT PANEL | Continue to Step 3 | Instrument not working | Change the instrument Op. 5560B10 | |
| 3 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |
Parts & tools for this job For 1998 Fiat Multipla
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Multipla
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.