Speedometer not working
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Instrument panel › Speedometer not working
Fault diagnosisSpeedometer not working
SPEEDOMETER NOT WORKING
With the ignition key ON, the speedometer does not work or works irregularly
| Results of the tests | ||||
| 1 | CHECK SPEEDOMETER ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
|---|---|---|---|---|
Check, in order:
( See E4010 INSTRUMENT PANEL). | Continue to Step 2 | Component defective | Replace the component involved (if a fuse is involved, search for the cause of the problem) | |
| Connections broken | Restore the connections | |||
| 2 | CHECK SPEEDOMETER SENSOR | All OK | Problems met | Operation |
| Check the operation of the speedometer sensor | Continue to Step 3 | Sensor not working | Replace the speedometer sensor Op. 2180A36 | |
| 3 | CHECK INSTRUMENT | All OK | Problems met | Operation |
| Check the operation of the instrument and the speedometer in particular see DESCRIPTION AND OPERATION: 5560 INSTRUMENT PANEL | Continue to Step 4 | Instrument not working | Change the instrument Op. 5560B10 | |
| 4 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |
Parts & tools for this job For 1998 Fiat Multipla
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Multipla
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.