Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Multipla Factory Service Manual (1998-2010)22 · Fault diagnosis
22 · Diagnostics

Water penetration passenger compartment, front area

Make
Fiat
Model
Multipla Factory Service Manual
Year
1998–2010
Section
Water penetration › Water penetration passenger compartment, front area
Fault diagnosisWater penetration passenger compartment, front area

WATER PENETRATION PASSENGER COMPARTMENT, FRONT AREA

When it is raining or after washing, there is water in the front of the passenger compartment.

Results of the tests
1CHECK THAT THERE IS NO PENETRATION THROUGH THE WINDSCREENAll OKProblems metOperation
Check the sealant on the windscreen See Test 7035A Check there is no penetration through the fixed windows (windscreen and rearscreen)Continue to Step 2No sealantRenew the sealant, following the instructions Op. 7035A04
2WINDSCREEN CHECKAll OKProblems metOperation

Check the windscreen. In particular, visually inspect:

  • the condition of the window
  • the flatness of the support surface
  • the flatness of the serigraphy
Continue to Step 3Faults in the windscreenReplace the windscreen Op. 7035A18
3WINDSCREEN BASE COVER CHECKAll OKProblems metOperation

Check the cover at the base of the windscreen In particular, visually inspect

  • the condition of the cover
  • that the cover and the windscreen wiper arm are properly fixed
Continue to Step 4Faults in the coverRenew or replace the cover Op. 7055A18
4CHECK ON COVER UNDER THE WINDSCREENAll OKProblems metOperation

Check the cover under the windscreen. In particular, visually inspect

  • the condition of the cover
  • that the cover is properly fixed
  • that the main beam headlamps are correctly fixed
Continue to Step 5Faults in the coverRenew or replace the cover Op. 7055A20
5ENGINE COMPARTMENT BULKHEAD DRAINAGE CHECKAll OKProblems metOperation

Check the drainage of the engine compartment bulkhead.

In particular, check for dirt, leaves etc.

Continue to Step 6Dirt in drainsClean the drains. If necessary refit correctly
6ENGINE COMPARTMENT BULKHEAD CHECKAll OKProblems metOperation

Check the engine compartment bulkhead. In particular, ascertain:

  • the plugs are fitted
  • the plugs are correctly fitted
  • the rubber cable covers are fitted correctly
  • the sealing is efficient
  • correct assembly
Continue to Step 7Faults in the engine compartment bulkheadRestore the engine compartment bulkhead fitting and fixings
5CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsSearch for the fault starting from another symptom'

Parts & tools for this job For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.