1020 crankcase sump and covers
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- 10 engine › 1020 crankcase sump and covers
Tightening torques1020 crankcase sump and covers
1020 CRANKCASE SUMP AND COVERS
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| AUX SHAFT SEAL COVER | Bolt | M6 | 1.1 | 1.6 16v |
| AUXILIARY SHAFT DRIVEN GEAR | Bolt | M10 | 8 | 1.6 16v |
| AUXILIARY SHAFT DRIVEN GEAR | Bolt | M10 | 8 | 1.6 16v |
| CRANKSHAFT FRONT COVER | Bolt | M6 | 0.7 | 1.6 16v |
| CRANKSHAFT FRONT COVER | Bolt | M6 | 0.8 - 1.0 | 1.9 JTD 8V |
| CRANKSHAFT FRONT COVER | Bolt | M6 | 0.8 - 1.0 | 1.9 JTD 8V |
| CRANKSHAFT FRONT COVER | Bolt | M6 | 0.8 ÷ 1.0 | 1.9 JTD 8V |
| CYLINDER HEAD | Bolt | M12 | 6.5 +90˚ + 90˚ +90˚ | 1.9 JTD 8V |
| ENGINE OIL DRAIN PLUG | Bolt | M18 x 1.5 | 2 | 1.9 JTD 8V |
| ENGINE OIL DRAIN PLUG | Bolt | M6 | 0.9 | 1.6 16v |
| ENGINE OIL DRAIN PLUG | Plug | M22 | 5 | 1.6 16v |
| FLYWHEEL SIDE COVER | Bolt | M6 | 0.8 - 1.0 | 1.9 JTD 8V |
| FLYWHEEL SIDE COVER | Bolt | M6 | 0.8 - 1.0 | 1.9 JTD 8V |
| FLYWHEEL SIDE COVER | Bolt | M6 | 08 - 10 | 1.9 JTD 8V |
| OIL BULK HEAD | Bolt | M6 | 0.5 ÷ 0.6 | 1.9 JTD 8V |
| OIL SUMP | Bolt | M6 | 0.9 | 1.6 16v 1.9 JTD 8V |
| OIL SUMP | Bolt | M8 | 2.5 | 1.9 JTD 8V |
| OIL SUMP | Front and rear bolts | M6 | 0.7 - 0.9 | 1.9 JTD 8V |
| OIL SUMP | Side bolts | M8 | 2.1 - 2.6 | 1.9 JTD 8V |
Parts & tools for this job For 1998 Fiat Multipla
- PARTEngine gasket setSearch: Fiat Multipla 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.