1080 exhaust emission control system
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- 10 engine › 1080 exhaust emission control system
Tightening torques1080 exhaust emission control system
1080 EXHAUST EMISSION CONTROL SYSTEM
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| CATALYTIC CONVERTER (ONE) | Nut | 5.5 | 1.6 16v 1.9 JTD 8V BIPOWER BLUPOWER | |
| CATALYTIC PRE-CONVERTER | Bolt | M8 | (Reinforcement bracket) 2.5 | 1.9 JTD 8V |
| CATALYTIC PRE-CONVERTER | Nut | M8 | (Catalytic converter exhaust pipe) 2.5 | 1.9 JTD 8V |
| CATALYTIC PRE-CONVERTER | Nut | M10 x 1.5 | (Turbocharger) 2.5 | 1.9 JTD 8V |
| CONVERTER FRONT LAMDBA SENSOR | Lambda probe | M8 x 1.5 | 4.5 | 1.6 16v |
| CONVERTER REAR LAMBDA SENSOR | Lambda probe | M8 x 1.5 | 4.5 | 1.6 16v |
| E.G.R ELECTRICAL VALVE | Bolt | M8 | 2.5 | 1.9 JTD 8V |
| E.G.R VALVE EXPANSION JOINT. | Bolt | M8 | 2.5 | 1.9 JTD 8V |
| EGR VALVE | Bolt | M8 | 2.5 | 1.9 JTD 8V |
| LAMBDA PROBE | M18 x 1.5 | 4.8 | 1.6 16v |
Parts & tools for this job For 1998 Fiat Multipla
- PARTExhaust gasketSearch: Fiat Multipla 1998 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.