1072 inlet and exhaust manifolds
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- 10 engine › 1072 inlet and exhaust manifolds
Tightening torques1072 inlet and exhaust manifolds
1072 INLET AND EXHAUST MANIFOLDS
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| EXHAUST MANIFOLD/S | Bolt | M6 | 3 | 1.6 16v |
| EXHAUST MANIFOLD/S | Nut | M8 | (Cylinder head side) 2.1 ÷ 2.6 | 1.9 JTD 8V |
| EXHAUST MANIFOLD/S | Nut | M8 | 2.5 | 1.6 16v |
| INLET AIR DUCT | Bolt | M7 | 1.5 | 1.6 16v |
| INLET MANIFOLD | Bolt | M8 | 2.5 | 1.9 JTD 8V |
| INLET MANIFOLD | Nut | M8 | 2.5 | 1.6 16v |
| INLET MANIFOLD | Nut | M8 | 3.5 | 1.9 JTD 8V |
| LH MANIFOLD HEAT SHIELD BULKHEAD | Bolt | M6 | (Exhaust manifold) 0.9 | 1.9 JTD 8V |
| LH MANIFOLD HEAT SHIELD BULKHEAD | Bolt | M6 | 0.6 | 1.6 16v |
| LH MANIFOLD HEAT SHIELD BULKHEAD | Nut | M6 | (Exhaust manifold) 0.9 | 1.9 JTD 8V |
Parts & tools for this job For 1998 Fiat Multipla
- PARTExhaust gasketSearch: Fiat Multipla 1998 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.