1024 crankshaft and flywheel
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- 10 engine › 1024 crankshaft and flywheel
Tightening torques1024 crankshaft and flywheel
1024 CRANKSHAFT AND FLYWHEEL
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| BIG END BEARING CAPS | Bolt | M9 | 2.4 - 2.6 + 60˚ | 1.9 JTD 8V |
| FLYWHEEL | Bolt | M10 | 8.3 | 1.6 16v |
| FLYWHEEL | Bolt | M12 | 13.6 - 16.8 | 1.9 JTD 8V |
| FLYWHEEL | Bolt | M12 | 16 | 1.9 JTD 8V |
| MAIN BEARING CAPS | Bolt | M12 | (Engine crankcase side) 2.4 ÷ 2.6 +100˚ | 1.9 JTD 8V |
Parts & tools for this job For 1998 Fiat Multipla
- PARTEngine gasket setSearch: Fiat Multipla 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.