Fuel line from manifolds - r r

Operation 1040B54 · Fuel supply/return circuit pipe

1.3 JTD 16v

Removing

Disconnect the battery negative terminal.

1. Disconnect the electrical connection from the air flow meter.

2. Loosen the band and disconnect the the turbocharger air inlet sleeve from the rigid pipe, air flow meter side.

1. Remove the air filter (1a) complete with air flow meter (1b) by releasing from the underlying pins and then from the rear fastenings.

1. Disconnect the quick-release connector for the front fuel return pipe, fuel filter side.

2. Disconnect the rapid attachment for the front fuel return pipe, rear fuel return pipe side.

1. Disconnect the rapid attachment on the front fuel return pipe, single fuel manifold pipe side.

2. Undo the bolts (2a) and open the pipe passage channel (2b).

3. Remove the front fuel return pipe (3a) after releasing it from the bands (3b).

Refitting

Place the front fuel return pipe back in its housing and fix it using the bands.

Close the pipe passage channel and secure it with the bolts.

Connect the rapid connector for the front fuel return pipe, rear fuel return pipe side.

Connect the quick-release connector for the front fuel supply pipe, fuel filter side.

Connect the rapid attachment of the front fuel return pipe, single fuel manifold pipe side.

Fit the air filter complete with air flow meter.

Connect the air intake sleeve to the turbocharger, air flow meter side, and tighten the band.

Connect the electrical connection to the air flow meter.

Connect the battery negative terminal.