Rear fuel delivery line - r r

Operation 1040B36 · Fuel supply/return circuit pipe

1.1

Removing

Move the load carrying compartment lining away from the work area.

1. Undo the rear bolts fixing the rear seat cushion.

1.2 8v

Removing

Move the load carrying compartment lining away from the work area.

1. Undo the rear bolts fixing the rear seat cushion.

1.1

1. Undo the front bolts fixing the rear seat cushion.

2. Remove the rear seat cushion.

1.2 8v

1. Undo the front bolts fixing the rear seat cushion.

2. Remove the rear seat cushion.

1.1

1. Remove the submerged pump protective cover.

2. Disconnect the pipe rapid connector from the submerged pump.

1.2 8v

1. Remove the submerged pump protective cover.

2. Disconnect the pipe rapid connector from the submerged pump.

1.1

- 1040E22 fuel pipe protection - r r

Position a hydraulic lift to support the fuel tank.

1. Undo the bolts fixing the fuel tank.

2. Lower the fuel tank using the hydraulic lift positioned previously.

1.2 8v

- 1040E22 fuel pipe protection - r r

Position a hydraulic lift to support the fuel tank.

1. Undo the bolts fixing the fuel tank.

2. Lower the fuel tank using the hydraulic lift positioned previously.

1.1

1. Disconnect the rapid connector and remove the rear fuel supply pipe.

1.2 8v

1. Disconnect the rapid connector and remove the rear fuel supply pipe.

1.1

Refitting

Fit the rapid connector for the rear pipe on the front fuel supply pipe connector.

Fit the rapid connector for the rear fuel supply pipe on the submerged pump.

Secure the pipe to the retaining bands on the fuel tank.

Raise the fuel tank using the hydraulic lift and tighten the bolts fixing it to the bodyshell to torque.

- 1040E22 fuel pipe protection - r r

Fit the protective cover for the submerged fuel pump.

Fit the rear seat cushion in place and tighten the fixing bolts to torque.

Fit the load carrying compartment lining in place.

1.2 8v

Refitting

Fit the rapid connector for the rear pipe on the front fuel supply pipe connector.

Fit the rapid connector for the rear fuel supply pipe on the submerged pump.

Secure the pipe to the retaining bands on the fuel tank.

Raise the fuel tank using the hydraulic lift and tighten the bolts fixing it to the bodyshell to torque.

- 1040E22 fuel pipe protection - r r

Fit the protective cover for the submerged fuel pump.

Fit the rear seat cushion in place and tighten the fixing bolts to torque.

Fit the load carrying compartment lining in place.