23 · Diagnostics

Connect not working

Fault diagnosisConnect not working

CONNECT NOT WORKING

The Connect screen does not come on (goes on and off sporadically)

1	ELECTRICAL CONNECTION CHECK	All OK	Problems encountered	Operation
	Withdraw the Connect unit from the facia and check the connections Check the condition of the fuse on the Connect body. Check that the correct power supplies are present at the Connect connectors See Test 5580PO CONNECT POWER SUPPLY CHECK+C141	Move on to Step 2	Fuse blown No power supply Incorrect earth connection	Renew the blown fuse after ascertaining the cause Restore correct power supply See E4090 NAVIGATOR Restore the correct earth connection See E4090 NAVIGATOR
2	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Check that it is working properly	End of diagnosis	The fault persists	Replace Connect

ELECTRICAL CONNECTION CHECK

All OK

Problems encountered

Operation

Withdraw the Connect unit from the facia and check the connections

Check the condition of the fuse on the Connect body.

Check that the correct power supplies are present at the Connect connectors

Move on to Step 2

CHECK ON CORRECT OPERATION

All OK

Problems encountered

Operation

Check that it is working properly

End of diagnosis

The fault persists

Replace Connect

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.