1012 engine crankcase – crank case
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- 10 engine › 1012 engine crankcase – crank case
‹ Prev 1004 engine and power unit – crankcase and componentsNext › 1012 engine crankcase – cylinder liners
Manufacturing data and tolerances1012 engine crankcase – crank case
1012 ENGINE CRANKCASE – CRANK CASE
| Cylinder bore diameter (mm) | Validity | 
| ||
|---|---|---|---|---|
| Category B | Category C | Classe A | ||
| 70.810 - 70.820 | 70.820 - 70.830 | 70.800 - 70.810 | 1.2 8v | |
| Cylinder bore ovalization (mm) | Validity | 
| ||
| ± 0.05 | 1.2 8v | |||
| Cylinder bore taper (mm) | Validity | 
| ||
| ± 0.005 | 1.2 8v | |||
| Cylinder liner/bore inner diameter oversize (mm) | Validity | 
| ||
| 0.4 | 1.2 8v | |||
| Flatness of cylinder head supporting surface (mm) | Validity | 
| ||
| < 0.1 | 1.1 1.2 8v | |||
| Tappet casing housing diameter (mm) | Validity | |||
| 35.000 - 35.025 | 1.1 | |||
‹ Prev 1004 engine and power unit – crankcase and componentsNext › 1012 engine crankcase – cylinder liners
Parts & tools for this job For 2003 Fiat Panda
- PARTEngine gasket setSearch: Fiat Panda 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.