Front differential and transmission controls-adjustments
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Trasmission › Front differential and transmission controls-adjustments
SpecificationsFront differential and transmission controls-adjustments
FRONT DIFFERENTIAL AND TRANSMISSION CONTROLS-ADJUSTMENTS
| 1.2 8V 4x4 - 4x4 Climbing | 1.3 Multijet 4x4 | |
|---|---|---|
| Bevel drive ratio | 2.764 | 2.764 |
| Bevel pinion adjustment position | by shims | by shims |
| Thickness of spare bevel pinion positioning shims (mm) | 0.7 ÷ 1.25 (with 0.05 mm increments) | 0.7 ÷ 1.25 (with 0.05 mm increments) |
| Ring gear and spur pinion position adjustment | by shims | by shims |
| Thickness of spare pinion and ring gear positioning shims (mm) | 0.3 ÷ 0.55 (with 0.05 mm increments) | 0.3 ÷ 0.55 (with 0.05 mm increments) |
| Backlash between bevel pinion and ring gear (mm) | 0.15 ÷ 0.20 | 0.15 ÷ 0.20 |
| Bevel pinion bearing preload adjustment (mm) | by shims | by shims |
| Bevel pinion bearing preload spare shim thickness (mm) | 23.10 ÷ 23.80 (with 0.05 mm increments) | 23.10 ÷ 23.80 (with 0.05 mm increments) |
| Ring-gear-pinion bearing preload adjustment | by shims | by shims |
| Thickness of spare pinion and ring gear preload shims (mm) | 23.10 ÷ 23.80 (with 0.05 mm increments) | 23.10 ÷ 23.80 (with 0.05 mm increments) |
Parts & tools for this job For 2003 Fiat Panda
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.