Rear differential controls-adjustments
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Trasmission › Rear differential controls-adjustments
SpecificationsRear differential controls-adjustments
REAR DIFFERENTIAL CONTROLS-ADJUSTMENTS
1.2 8V 4x4 - 4x4 Climbing | 1.3 Multijet 4x4 | |
|---|---|---|
| Bevel drive ratio | 2.77 | 2.77 |
| Bevel pinion rolling torque (daNm) | 0.23 ÷ 0.34 | 0.23 ÷ 0.34 |
| Bevel pinion position adjustment shims (mm) | 0.51 ÷ 1.40 (with 0.05 mm increments) | 0.51 ÷ 1.40 (with 0.05 mm increments) |
| Bevel pinion rolling torque (daNm) | 0.30 ÷ 0.70 | 0.30 ÷ 0.70 |
| Bevel pinion position adjustment shims (mm) | 1.91 ÷ 3.00 (with 0.05 mm increments) | 1.91 ÷ 3.00 (with 0.05 mm increments) |
| Pinion-ring gear backlash (mm) | 0.10 ÷ 0.18 | 0.10 ÷ 0.18 |
Parts & tools for this job For 2003 Fiat Panda
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.