Refitting (page 2 of 4)

Make

Fiat

Model

Punto (176) Factory Service Manual

Year

1993–1999

Section

Partial replacements (1242 16v)

10 EngineRefitting · page 2 of 4

1. Remove the resonator together with the intake manifold by disconnecting the clip shown from the butterfly valve case and unscrewing the retaining bolts. Then disconnect the oil vapour recovery pipe from the lower part of the resonator.
2. Disconnect the accelerator control cable.
3. Disconnect the connections shown and the brake servo vacuum line from the butterfly valve case.
4. Disconnect pipes (1) and connections (2) from the upper part of the intake manifold.
5. Remove screws retaining the upper part of the intake manifold using wrench USAG TX 27 or similar. Disconnect oil vapour recovery pipe (1) and remove the manifold from the vehicle together with the butterfly valve case.

02 Engine