Removing-refitting cylinder head (page 2 of 2)

Make

Fiat

Model

Punto (176) Factory Service Manual

Year

1993–1999

Section

Partial replacements (1242 16v)

10 EngineRemoving-refitting cylinder head · page 2 of 2

1. Release the injection leads from the lower part of the intake manifold by unscrewing the support bracket retaining bolts.
2. Undo nuts retaining the first exhaust pipe section to the manifold.
3. Unscrew caps protecting bolts securing cylinder head extension to cylinder head. Remove part (1).
4. Use wrench 1860834000 to unscrew bolts retaining the cylinder head extension to the cylinder head.
5. Position tappet retaining tool pair 1860988000, then remove the cylinder head extension from the cylinder head, tools 1860992000 and cylinder head gasket.

02 Engine