Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting power unit (page 4 of 7)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1242 16v)
10 EngineRemoving-refitting power unit · page 4 of 7
Diagram showing engine components with arrows pointing to various connection points and pipes
Diagram showing cooling fan assembly with arrows indicating bolts and connections
Diagram of fuel lines and support bracket with arrows pointing to retaining tabs and connections. Two icons depicting fluid levels are printed to the right of the diagram
  1. Drain the engine cooling system by disconnecting both pipes shown in the figure.
  2. Remove the cooling fan by unscrewing the bolts securing it to the radiator and disconnecting the supply connection.
  3. Disconect the fuel intake lines by undoing the retaining tabs. Remove the support bracket shown in the figure.
  4. Disconnect the radiator outlet pipe shown in the figure.
  5. Disconnect the evaporation control system pipe from the upper part of the inlet manifold.
Diagram showing a component with an arrow pointing to a specific connection point on the engine
Diagram showing a pipe connection near the engine with an arrow pointing to the fitting

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.