Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting power unit (page 5 of 7)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1242 16v)
10 EngineRemoving-refitting power unit · page 5 of 7
Diagram showing the engine bay with arrows pointing to electrical connectors and wiring clips on the injection control unit.
Diagram of the front wheel hub, brake disc, and steering knuckle area.
Diagram showing a tool being used to remove staking from the wheel hub retaining nuts.
  1. Disconnect the connector from the injection control unit, release wiring from retaining clips and then remove the control unit from its bracket.
  2. Remove staking on the wheel hub retaining nuts.
  3. Unscrew the wheel hub retaining bolts.
  4. Remove the nut securing the steering head to the pillar, then disconnect the head itself using tool 1847035000. Repeat the operation on the other side.
  5. Release the brake oil line and ABS sensor cable from the fastening point.
Diagram showing hands using tool 1847035000 to disconnect the steering head from the pillar.
Diagram showing the brake oil line and ABS sensor cable being released from their fastening point on the suspension pillar.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.