Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1372 T) › Removing-refitting
10 EngineRemoving-refitting · page 1 of 2

Removing-refitting

  1. 10.
View of engine bay components with arrows indicating fasteners on a black plastic cover
Close-up of turbo control valve area with arrows pointing to connectors and screws
Close-up of lambda probe lead connectors with arrows indicating connection points

P3M02CJ01

P3M02CJ02

P3M02CJ03

Wide view of the engine compartment showing various hoses, wiring, and components
  1. Unscrew bolts and remove the protection.
  2. Disconnect connector and unscrew screw, then prise out the turbo control valve.
  3. Disconnect the lambda probe lead connectors.
  4. Disconnect the vacuum intake lines shown in the figure (servo brake and injection/ignition control unit).
  5. Loosen the clip and disconnect the coolant return line to the expansion tank.
  6. Separate the positive lead shown in figure from the battery terminal.

P3M02CJ04

Close-up of vacuum lines and connections near the firewall
Close-up of electrical connectors and wiring harnesses in the engine bay
Close-up of a hose connection point with an arrow indicating a clip or fastener

P3M02CJ05

P3M02CJ06

P3M02CJ07

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.