Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting (page 2 of 2)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1372 T)
10 EngineRemoving-refitting · page 2 of 2
Close-up of a coolant delivery pipe connection with an arrow indicating the direction to loosen a clip
Close-up of a vacuum intake line being disconnected from a fitting, indicated by arrows
View of engine components showing clips on coolant delivery and return lines to the passenger compartment heater
Wide view of the engine bay showing the gear engagement lever, air delivery lines, cable protection, and earth lead
  1. Disconnect the coolant delivery pipe from the expansion tank by loosening the clip. Disconnect the vacuum intake line from the fitting shown.
  2. Disconnect the gear engagement lever, remove the retaining plate and withdraw the lead.
  3. Loosen the clips and disconnect the coolant delivery and return lines to the passenger compartment heater.
  4. Disconnect the line from the thermostat to the radiator.
  5. Loosen the clips indicated and remove the air delivery lines.
  6. Remove the cable protection and the earth lead by unscrewing the bolts indicated.
Close-up of air delivery lines with arrows indicating the clips to be loosened
Close-up of the cable protection and earth lead mounting points, indicated by arrows
View of the engine block area showing the bolts for the cable protection and earth lead

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.