Checking trailing arm

Checking trailing arm

Check that the trailing arm is not cracked or deformed and does not show signs of wear (on the wheel side surface), otherwise it must be renewed. It is supplied as a spare part complete with stub axle.

Refitting trailing arm

15,5 daNm

Tighten the bolts securing the trailing arm to the chassis to a torque of 15.5 daNm.

Tightening bolts securing anti-roll bar to trailing arm to correct torque

Tighten the bolts (1) to a torque of 3 daNm and bolt (2) to a torque of 5.6 daNm.

Original page

View full sizeFit to page