Refitting rear suspension
- Make
- Fiat
- Model
- Punto (176) Factory Service Manual
- Year
- 1993–1999
- Section
- Rear suspension › Refitting rear suspension
44 Suspension and wheelsRefitting rear suspension
10 daNm
Refitting rear suspension
Tighten the front and rear bolts which secure the rear suspension to the body shell, to a torque of 10 daNm.
| 1 | 3 daNm |
|---|---|
| 2 | 5,6 daNm |
Refitting anti-roll bar
Tighten the bolts (1) to a torque of 3 daNm and the bolt (2) to a torque of 5.6 daNm.
28 daNm
Tightening hub nut to correct torque
Tighten the wheel hub nut to a torque of 28 daNm.
Bleed the brakes
Check rear wheel geometry
Parts & tools for this job For 1993 Fiat Punto
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTRear shock absorbersSearch: Fiat Punto 1993 rear shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.