Blink Code Table

Make

Fiat

Model

Punto (176) Factory Service Manual

Year

1993–1999

Section

Air bag › Blink Code Table

55 Electrical systemBlink Code Table

Blink Code Table

Flashes	POSSIBLE FAILURE	REMEDIES
1	System OK
2	Control unit fault	Replace control unit
3	Wiring for module priming circuits in contact with +12V	Check the wiring
4	Wiring for module priming circuits in contact with earth	Check the wiring
5	Resistance for driver's module priming device outside of tolerance	Check wiring or replace driver's module
6	Resistance for passenger module priming device outside of tolerance	Check wiring or replace passenger module
7	Supply voltage below 9.5V	Recharge or replace battery
8	Warning light circuit faulty	Replace warning light bulb - Check the wiring

Air Bag System Diagram

1. Instrument panel with AIR BAG failure warning light
2. Driver's AIR BAG module
3. Passenger AIR BAG module
4. Connector connecting AIR BAG system to dashboard cable loom, located under the dashboard, on the left of the heater unit
5. Diagnostic socket for Fiat/Lancia Tester
6. AIR BAG electronic control unit
7. Connector for clock spring

09 Electrical