Refitting steering wheel

- completely remove the red coloured warranty adhesive tape;

If this tape is not properly removed it could cause noise through interference with the upper part of the steering column switch unit when the steering wheel is rotated.

- if the clock spring is replaced or refitted, connect the connector for the cable with the yellow outer casing to the clock spring and check that it is attached; - if fitted, fit the cable with the yellow outer casing on the fixing spring located on the upper part of the steering column switch unit.

Refitting steering wheel

Make sure that the wheels are completely steered to the right.

- Carefully introduce firstly the cable with the white connector and then the cable with the black connector through the special square shaped slit in the steering wheel hub; - fit the steering wheel ensuring that the references marked previously coincide;

When refitting the steering wheel, pay attention to the clock spring centering tabs which should pass through the slit without force.