Refitting steering wheel (page 2 of 2)

5,5 daNm

• push the steering wheel downwards in the tapered housing; the upper clock spring ring should automatically lock in place;
• tighten a new nut fixing the steering wheel to a torque of 5.5 daNm;

• stake the new nut securing the steering wheel to the steering column;

Release the wheels and realign them.

• fit the rubber shield (1) on the nut checking that the projection (2) on the lower face engages in the smaller slot in the steering wheel hub;
• connect the 2 way black connector to the horn cable;

Pass the cable for the horns through the special recesses in the edges of the steering wheel housing, to avoid any possible interference.