Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)09 · 55 Electrical system
09 · Electrical

Refitting air bag device

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Air bag › Refitting air bag device
55 Electrical systemRefitting air bag device

REFITTING AIR BAG DEVICE

Diagram showing a hand connecting a white 2-way connector to the air bag device on the steering wheel
  • place the Air Bag device in the fitting position on the steering wheel, then turn it over towards the left;
  • connect the white 2 way connect in the housing in the Air Bag device capsule (see diagram at the side);
  • fit the Air Bag device in its housing, checking that the cable for the white 2 way connector is correctly routed as shown in the diagram;
  • tighten the three 5 mm bolts and fix the Air Bag device to the steering wheel.
Diagram showing the routing of the cable for the white 2-way connector within the air bag device housing

DO NOT CONNECT THE BATTERY UNTIL IT HAS BEEN CORRECTLY FITTED

NOTE After the operation, check the operation of the system using the FI-AT/LANCIA TESTER or other diagnostic equipment

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.