Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Punto (176) Factory Service Manual (1993-1999)09 · 55 Electrical system
09 · Electrical

Removing clock spring

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Air bag › Removing clock spring
55 Electrical systemRemoving clock spring · page 1 of 2
Diagram showing hands extracting the air bag device from the steering wheel, with callout numbers 1 and 2
- extract the device (1), turning it over towards the left whilst keeping it vertical, then disconnect the white 2 way connector (2) and detach the Air Bag device.

REMOVING CLOCK SPRING

Removing steering wheel

- If fitted, remove the rubber shield (1) fitted on the fixing nut;

When fitting, if the vehicle is found to be without a shield, one should be supplied.

Diagram showing the clock spring assembly inside the steering column with callout number 1
Diagram showing a wrench loosening the nut on the steering column
- remove the staking and loosen the nut fixing it to the steering column, then turn the steering wheel completely to the right;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.