Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Punto (176) Factory Service Manual (1993-1999)09 · 55 Electrical system
09 · Electrical

Removing clock spring (page 2 of 2)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Air bag
55 Electrical systemRemoving clock spring · page 2 of 2
Diagram showing a special tool clamped onto the steering column and pedal assembly to lock the wheels in place.
  • with the steering wheel turned completely to the right, lock the wheels in place using a special tool (one possible solution is illustrated in the diagram);
Close-up diagram of a hand disconnecting a black 2-way connector (1) by pressing on its tab.
  • disconnect the black 2 way connector supplying the horns (1), acting on the tab as illustrated in the diagram;
Diagram showing the back of the steering wheel hub with arrows indicating the nut to be undone and alignment marks between the hub and steering column.
  • completely undo the nut fixing the steering wheel and mark the reciprocal position between the steering wheel hub and the steering column;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.