Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Refitting

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Front door (Cabrio) › Refitting
70 BodyworkRefitting
Diagram showing the removal of bolts and separation of the door lining panel from retaining springs using a tool.
  • remove the bolts fixing the door lining panel to the bodyshell;
  • working as illustrated in the diagram use tool 1878077000 to separate the door lining panel from the retaining springs;
Diagram showing the removal of the door protective lining.
  • remove the door protective lining.

Carefully remove the lining paying great attention; then place it somewhere where it will be protected from dust so as not to damage the adhesive on the edges. When refitting, carefully stick the adhesive edge to the door frame; if the adhesive is no longer working properly, then the lining will have to be replaced.

Diagram showing the reinstalled door protective lining.

Refitting

To refit reverse the order of the operations carried out for the removal.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.