Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Removing

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Front door (Cabrio) › Removing
70 BodyworkRemoving
Diagram showing the upper interior door panel with wiring and mounting points, reference P3M41BM02 P3M41BM03

Removing

  • Remove the external rear view mirror (see page 35);
  • remove the door lining panel (see page 36);
  • move the door opening interior handle and the cable protection aside;
Diagram showing the internal door mechanism with arrows indicating bolts and adjustment nut locations, reference P3M41BM04 P3M41BM03
  • undo the upper fixing bolts and the lower adjustment nut;
Diagram showing the window glass being lifted out of the door frame, with an arrow indicating upward movement, reference P3M41BM05 P3M41BM06
  • lift up the window and remove the adjustment screw shown, then remove the window.

Refitting

To refit, simply reverse the order of the operations carried out for the removal.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.