Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Refitting

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Hood (Cabrio) › Refitting
70 BodyworkRefitting · page 1 of 2
Diagram showing the removal of an insert from a centre rib and the release of the lining.
- remove the insert from the centre ribs and release the lining.
Diagram showing a hand attaching the internal lining to the front cross member tabs and inserting the fixing insert into the front and centre rib.

Refitting

- Attach the internal lining to the front cross member tabs, then fit the lining to the front and centre rib inserting the fixing insert;
Diagram showing the side edge of the lining being stuck to the rear rib with adhesive, and the panel's side edge passing through the hood frame.
- using a brush and Bostik adhesive, stick the side edge of the lining to the rear rib;

Place the side edge of the panel on the rear rib passing through the hood frame as illustrated in the right inset.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.