Removing hood outer fabric

REMOVING HOOD OUTER FABRIC

Preliminary operations

• Remove the wing inner lining, following the instructions given on page 1 onwards, then mask the areas which could be damaged;
• place the hood in the halfway open position;
• release the rear cable and wrap tape around the end to prevent the paint from being damaged;
• undo the side nuts fixing the hood to the rear wing (see page 6).

Order of operations

• Remove the rear trim, undo the bolts underneath to remove the trim channel;
• unstick the hood from the frame, working as illustrated in the diagram;
• release the fabric tensioning cable (see inset);
• separate the velcro for the lining from the tensioning belt;

P3M15AM01

P3M15AM02

P3M15AM03