Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Removing a non activated pre-tensioner (page 2 of 3)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Seats (Cabrio)
70 BodyworkRemoving a non activated pre-tensioner · page 2 of 3
Diagram showing a special spanner being used to release the pre-tensioner from the side of the belt mounting.
  • release the pre-tensioner from the side of the belt mounting using a special spanner.
Diagram showing a tool releasing a cable from a front bracket (1) on the seat structure, with arrows indicating movement.
  • separate the belt mounting, releasing the cable from the front bracket (1) through the special slot, then position it to the side of the seat;
Diagram showing a pre-tensioner being removed after undoing a fixing bolt (1).
  • remove the pre-tensioner, after having undone the fixing bolt indicated.

Recover the rubber mounting (1) positioned at the rear of the power unit, because it will be used when fitting the new pre-tensioner.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.