Removing-refitting sunroof frame

REMOVING-REFITTING SUNROOF FRAME

Sequence of operations

To remove the sunroof frame, the following parts need to be removed:

• motor with its relay (see page 158);
• ceiling trim (see page 37).

1. Disconnect the front and rear pipes for discharging water leaks.
2. Undo the screws securing the frame's side mounting brackets.
3. Undo the screws securing the frame to the body shell (the other screws are positioned symmetrically); lower the frame and position it on the front seat headrests and rear parcel shelf; withdraw the frame from the vehicle.

REMOVING-REFITTING SLIDING BLIND

4. When the ceiling trim has been removed, unscrew at the point indicated and remove the frame guide limit block, then withdraw the blind.