Sequence of operations

Sequence of operations

NOTE This operation can be carried out with the roof fitted on the vehicle in the "spoiler" position.

1. Remove the circlip (A), undo the screw securing the limit bracket (arrowed); withdraw the "spoiler" from its anchorage pin; remove the glass as described on the preceding page.
2. Remove the circlip (arrowed); rotate the guide inwards to release the pin; withdraw the guide forwards, then remove the motor (see page 158).
3. Undo the screws securing the bracket and limit block (B) on the guide.
4. Move the spoiler anchorage mechanism in the direction of the arrow and release the limit block; undo the screw (C) and withdraw the guide assembly complete with transmission cable.