Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Sequence of operations

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Sunroof › Sequence of operations
70 BodyworkSequence of operations
Diagram of the sunroof panel on the car roof

Sequence of operations

  1. If the sunroof becomes faulty in in a position other than closed flush with the bodywork, proceed as described below.
  2. Detach the trim piece from the courtesy light, by disengaging at the point indicated, then remove the sunroof's emergency manual operating key from the rear of the trim piece.
  3. Insert the key inside the courtesy light, in the hole level with the roof operating motor.
  4. Position the end of the key level with the groove and push the safety lug upwards, then turn the key until the desired sunroof position is achieved.
Interior view showing the courtesy light trim panel being detached from the ceiling
The trim piece removed to reveal the interior of the courtesy light housing
Close-up of the sunroof emergency manual operating key inserted into the motor mechanism

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.