Replacing rear window glass (rearscreen) (page 5 of 6)

• temporarily place the window glass in position using the special suction pads;
• when the window glass is correctly aligned, mark the position on the housing using strips of adhesive tape;
• cut the strips of adhesive tape and remove the window glass;

• using a special wad, apply the adhesion promoter taking care not to come outside of the serigraphed area;

NOTE Leave the adhesion promoter to dry at ambient temperature for at least 15 minutes and for no longer than 24 hours.

• using a spray gun, apply the sealant to the window glass, following the instructions given for the front window glass (see page 63);